| contributor author | D. C. Winfield | |
| contributor author | B. C. Soriano | |
| date accessioned | 2017-05-08T23:58:32Z | |
| date available | 2017-05-08T23:58:32Z | |
| date copyright | January, 1998 | |
| date issued | 1998 | |
| identifier issn | 1048-9002 | |
| identifier other | JVACEK-28842#206_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/121515 | |
| description abstract | The objective was to model planar motion of a flexible beam with a tip mass that is driven by two kinematic rotational degrees of freedom which are (1) at the center of the hub and (2) at the point the beam is attached to the hub. The equations of motion were derived using Lagrange’s equations and were solved using the finite element method. The results for the natural frequencies of the beam especially at high tip masses and high rotational velocities of the hub were calculated and compared to results obtained using the Raleigh-Ritz method. The dynamic response of the beam due to a specified hub rotation was calculated for two cases. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Planar Motion of a Flexible Beam With a Tip Mass Driven by Two Kinematic Rotational Degrees of Freedom | |
| type | Journal Paper | |
| journal volume | 120 | |
| journal issue | 1 | |
| journal title | Journal of Vibration and Acoustics | |
| identifier doi | 10.1115/1.2893807 | |
| journal fristpage | 206 | |
| journal lastpage | 213 | |
| identifier eissn | 1528-8927 | |
| keywords | Degrees of freedom | |
| keywords | Motion | |
| keywords | Equations of motion | |
| keywords | Finite element methods | |
| keywords | Rotation | |
| keywords | Dynamic response | |
| keywords | Equations AND Frequency | |
| tree | Journal of Vibration and Acoustics:;1998:;volume( 120 ):;issue: 001 | |
| contenttype | Fulltext | |
