Show simple item record

contributor authorK. Tanaka
contributor authorJ. Ishikawa
contributor authorA. Shimamoto
date accessioned2017-05-08T23:57:49Z
date available2017-05-08T23:57:49Z
date copyrightOctober, 1998
date issued1998
identifier issn0742-4787
identifier otherJOTRE9-28678#800_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/121133
description abstractThis three part paper presents the experiment and numerical analysis of the friction of a thin-film rigid disk with circumferential surface texture. In Part III, we examine the friction of a disk on the unworn virgin and worn tracks at various relative humidities. The real contact areas and pressures on both tracks are estimated using the Hertz contact model of two-dimensional asperities in Part I and related to the frictional coefficients on the basis of the meniscus model in Part II. The analysis yields that the effect of meniscus is predominant in the flat contact situation, particularly on the worn track at high humidity, while the effect is negligible in the taper/flat edge contact situation on both the tracks even at high humidity.
publisherThe American Society of Mechanical Engineers (ASME)
titleElastic Contact and Friction Between Sliders and Circumferentially Textured Disks—Part III: Experiments
typeJournal Paper
journal volume120
journal issue4
journal titleJournal of Tribology
identifier doi10.1115/1.2833782
journal fristpage800
journal lastpage807
identifier eissn1528-8897
keywordsFriction
keywordsDisks
keywordsSurface texture
keywordsNumerical analysis AND Thin films
treeJournal of Tribology:;1998:;volume( 120 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record