Show simple item record

contributor authorH. Uehara
contributor authorE. Stuhlträger
contributor authorA. Miyara
contributor authorH. Murakami
contributor authorK. Miyazaki
date accessioned2017-05-08T23:54:37Z
date available2017-05-08T23:54:37Z
date copyrightMay, 1997
date issued1997
identifier issn0199-6231
identifier otherJSEEDO-28271#160_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/119347
description abstractThe performance test of a shell-and-plate-type evaporator designed for OTEC plants, geothermal power plants, and heat pump systems is reported. This evaporator contains 30 plates with a unit area of 0.813 m2 , coated with aluminum powder on the working fluid side. Freon 22 is used as working fluid. Results show an overall heat transfer coefficient of about 5000 W/(m2 K) when the heating water velocity is 1 m/s. The mean boiling heat transfer coefficient is compared with a previous correlation proposed by Nakaoka and Uehara (1988). The water-side pressure loss is also reported.
publisherThe American Society of Mechanical Engineers (ASME)
titleHeat Transfer and Flow Resistance of a Shell and Plate-Type Evaporator
typeJournal Paper
journal volume119
journal issue2
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.2887897
journal fristpage160
journal lastpage164
identifier eissn1528-8986
keywordsElectrical resistance
keywordsFlow (Dynamics)
keywordsHeat transfer
keywordsShells
keywordsFluids
keywordsWater
keywordsHeat transfer coefficients
keywordsPressure
keywordsHeating
keywordsGeothermal power stations
keywordsOcean thermal energy conversion
keywordsTesting performance
keywordsAluminum powders
keywordsBoiling
keywordsPlates (structures)
keywordsHeat pumps AND Industrial plants
treeJournal of Solar Energy Engineering:;1997:;volume( 119 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record