| contributor author | I. O. MacConochie | |
| contributor author | A. Cameron | |
| date accessioned | 2017-05-08T23:54:30Z | |
| date available | 2017-05-08T23:54:30Z | |
| date copyright | March, 1960 | |
| date issued | 1960 | |
| identifier issn | 0098-2202 | |
| identifier other | JFEGA4-27220#29_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/119278 | |
| description abstract | The voltage drop across thin oil films when a constant current of 1 amp is passed, i.e., the discharge voltage, is used to measure the oil-film thickness between loaded gear teeth while running. It is found that the thickness at the pitch line is between 1 and 4 × 10−4 in., which varies slightly with the viscosity and rather more strongly with load. The thickness at the tips and roots is very dependent on the tip relief. The conditions here may explain the difference between disk and gear tests. These experimental values are compared with theoretical work and are shown to be of the same order of magnitude. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | The Measurement of Oil-Film Thickness in Gear Teeth | |
| type | Journal Paper | |
| journal volume | 82 | |
| journal issue | 1 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.3662549 | |
| journal fristpage | 29 | |
| journal lastpage | 34 | |
| identifier eissn | 1528-901X | |
| keywords | Gear teeth | |
| keywords | Thickness | |
| keywords | Electric potential | |
| keywords | Viscosity | |
| keywords | Stress | |
| keywords | Drops | |
| keywords | Gears AND Disks | |
| tree | Journal of Fluids Engineering:;1960:;volume( 082 ):;issue: 001 | |
| contenttype | Fulltext | |
