Show simple item record

contributor authorC. Lay
contributor authorJ. Madia
contributor authorS. K. Sinha
contributor authorO. A. Abu-Yasein
contributor authorM. A. Pickett
date accessioned2017-05-08T23:54:27Z
date available2017-05-08T23:54:27Z
date copyrightNovember, 1997
date issued1997
identifier issn0094-9930
identifier otherJPVTAS-28380#451_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/119232
description abstractThe damping coefficients and ratios of piping system snubber supports were found to vary logarithmically with pipe support nodal displacement. For piping systems with fundamental frequencies in the range of 0.6 to 6.6 Hz, the support damping ratio for snubber supports was found to increase with increasing fundamental frequency. For 3-kip snubbers, damping coefficient and damping ratio decreased logarithmically with nodal displacement, indicating that the 3-kip snubbers studied behaved essentially as coulomb dampers; while for the 10-kip snubbers studied, damping coefficient and damping ratio increased logarithmically with nodal displacement.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Influence of Support Hardware and Piping System Seismic Response on Snubber Support Damping
typeJournal Paper
journal volume119
journal issue4
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.2842329
journal fristpage451
journal lastpage456
identifier eissn1528-8978
keywordsHardware
keywordsDamping
keywordsPiping systems
keywordsDisplacement
keywordsFrequency
keywordsCoulombs
keywordsPipes AND Dampers
treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record