Show simple item record

contributor authorH. Sakamoto
contributor authorK. Tan
contributor authorN. Takeuchi
contributor authorH. Haniu
date accessioned2017-05-08T23:53:47Z
date available2017-05-08T23:53:47Z
date copyrightSeptember, 1997
date issued1997
identifier issn0098-2202
identifier otherJFEGA4-27119#506_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/118875
description abstractSuppression of fluid forces acting on a square prism by passive control of the approaching flow was investigated in the present study. Flow was controlled using a small flat plate upstream of the prism. The position of the flat plate was varied within the range of S/W = 0 ~ 3.0 (S: distance between the flat plate and square prism, W: width of square prism) and the width h of the flat plate ranged from 2 mm to 8 mm (h/W = 0.05 ~ 0.19). Steady and unsteady fluid forces, vortex shedding frequency, and flow pattern were systematically investigated. The maximum reduction of time-averaged drag was 75 percent, and the maximum reduction in fluctuating lift and drag was 95 and 80 percent, respectively, using a flat plate 1/10 of the size of the square prism.
publisherThe American Society of Mechanical Engineers (ASME)
titleSuppression of Fluid Forces Acting on a Square Prism by Passive Control
typeJournal Paper
journal volume119
journal issue3
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.2819273
journal fristpage506
journal lastpage511
identifier eissn1528-901X
keywordsForce
keywordsFluids
keywordsPassive control
keywordsPrisms (Optics)
keywordsFlat plates
keywordsFlow (Dynamics)
keywordsDrag (Fluid dynamics) AND Vortex shedding
treeJournal of Fluids Engineering:;1997:;volume( 119 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record