| contributor author | Fenton L. Bagley | |
| contributor author | Roy Mennell | |
| date accessioned | 2017-05-08T23:47:43Z | |
| date available | 2017-05-08T23:47:43Z | |
| date copyright | June, 1960 | |
| date issued | 1960 | |
| identifier issn | 0098-2202 | |
| identifier other | JFEGA4-27222#347_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/115611 | |
| description abstract | The effects of lead addition in alloy steel upon the metal-cutting process were explored over a wide range of conditions. In particular, a range of cutting speeds (from 50 to 800 fpm) and workpiece hardness (from 230 to 450 Bhn) were investigated on one work-piece material (4340) using principally a carbide (C-6) cutting tool. Orthogonal (two-dimensional) data was taken to describe the metal-cutting process, and tool-life data were obtained by running a typical production tool to failure at the various cutting conditions. Several mechanisms to explain experimental results, including lead acting as a lubricant, are discussed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Machining Characteristics of Leaded Steel | |
| type | Journal Paper | |
| journal volume | 82 | |
| journal issue | 2 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.3662598 | |
| journal fristpage | 347 | |
| journal lastpage | 359 | |
| identifier eissn | 1528-901X | |
| keywords | Machining | |
| keywords | Steel | |
| keywords | Metal cutting | |
| keywords | Cutting | |
| keywords | Failure | |
| keywords | Indium alloys | |
| keywords | Mechanisms | |
| keywords | Lubricants AND Cutting tools | |
| tree | Journal of Fluids Engineering:;1960:;volume( 082 ):;issue: 002 | |
| contenttype | Fulltext | |
