Show simple item record

contributor authorM. Priven
contributor authorG. A. Bemporad
contributor authorJ. Atkinson
contributor authorH. Rubin
date accessioned2017-05-08T23:47:29Z
date available2017-05-08T23:47:29Z
date copyrightSeptember, 1995
date issued1995
identifier issn0098-2202
identifier otherJFEGA4-27097#347_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/115479
description abstractAn experimental analysis of the flow development caused by the simultaneous injection and withdrawal of a buoyant fluid layer with low Reynolds number in a double-diffusion environment is presented. The injection of positively, neutrally, and negatively buoyant fluid layers was simulated in the experimental setup. Innovative procedures were developed to efficiently create the desired density distributions in the laboratory flume. Results presented in this paper concern the injection of fluid into environments stratified by temperature, salinity or both. Basic features of the flow patterns are described, in particular, intrusion rate, effect on ambient stratification and vertical displacement. The experimental data on the fluid vertical displacement were compared with results from a numerical model and good agreement was found.
publisherThe American Society of Mechanical Engineers (ASME)
titleExperimental Study of a Laminar Jet in a Double-Diffusion Environment
typeJournal Paper
journal volume117
journal issue3
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.2817268
journal fristpage347
journal lastpage354
identifier eissn1528-901X
keywordsDiffusion (Physics)
keywordsFluids
keywordsFlow (Dynamics)
keywordsDisplacement
keywordsExperimental analysis
keywordsTemperature
keywordsComputer simulation
keywordsReynolds number
keywordsFlumes AND Density
treeJournal of Fluids Engineering:;1995:;volume( 117 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record