Show simple item record

contributor authorH. Salehizadeh
contributor authorN. Saka
date accessioned2017-05-08T23:39:35Z
date available2017-05-08T23:39:35Z
date copyrightOctober, 1992
date issued1992
identifier issn0742-4787
identifier otherJOTRE9-28498#690_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/110871
description abstractThe stress intensity factors for short straight and branched subsurface cracks subjected to a Hertzian loading are calculated by the finite element method. The effect of crack face friction on stress intensity factors is considered for both straight and branched cracks. The calculations show that the straight crack is subjected to pure mode II loading, whereas the branched crack is subjected to both mode I and mode II, with ΔKI /ΔKII < 0.25. Although KI is small, it strongly influences KII by keeping the branched crack faces apart. Based on the ΔKII values and Paris’s crack growth model, the number of stress reversals required to grow a crack in a rolling component from an initial threshold length to the final spalling length was estimated. It was found that the crack propagation period is small compared with the expected bearing fatigue life. Therefore, crack propagation is not the rate controlling factor in the fatigue failure of bearings operating under normal loading levels.
publisherThe American Society of Mechanical Engineers (ASME)
titleCrack Propagation in Rolling Line Contacts
typeJournal Paper
journal volume114
journal issue4
journal titleJournal of Tribology
identifier doi10.1115/1.2920937
journal fristpage690
journal lastpage697
identifier eissn1528-8897
keywordsCrack propagation
keywordsFracture (Materials)
keywordsStress
keywordsBearings
keywordsFinite element methods
keywordsFatigue life
keywordsFatigue failure AND Friction
treeJournal of Tribology:;1992:;volume( 114 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record