Show simple item record

contributor authorS. M. Graham
contributor authorW. G. Reuter
contributor authorW. R. Lloyd
contributor authorJ. S. Epstein
date accessioned2017-05-08T23:39:18Z
date available2017-05-08T23:39:18Z
date copyrightFebruary, 1992
date issued1992
identifier issn0892-7219
identifier otherJMOEEX-28080#16_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/110714
description abstractStandard methods for testing fracture toughness of homogeneous materials are currently being applied to welds. A weld is, by nature, a heterogeneous structure containing zones with different microstructures and mechanical properties. The validity of using fracture parameters developed for homogeneous materials to characterize fracture of welds has not been established. Tests were conducted to investigate whether the extension of a crack along an interface is governed by the same fracture parameters used to predict fracture in homogeneous materials. The tests involved measuring the displacement fields around a crack tip in the interface between two materials with matched elastic properties and differing yield strengths. The form of the displacement distribution was then compared with the theoretical displacements for linear elasticity and nonlinear elasticity with power-law hardening.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Validity of Standard Test Methods for Characterizing Weld Fracture
typeJournal Paper
journal volume114
journal issue1
journal titleJournal of Offshore Mechanics and Arctic Engineering
identifier doi10.1115/1.2919946
journal fristpage16
journal lastpage21
identifier eissn1528-896X
keywordsFracture (Process)
keywordsElasticity
keywordsWelded joints
keywordsDisplacement
keywordsFracture toughness
keywordsTesting
keywordsMechanical properties AND Hardening
treeJournal of Offshore Mechanics and Arctic Engineering:;1992:;volume( 114 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record