Show simple item record

contributor authorM. J. Hughes
contributor authorS. A. Kinnas
contributor authorJ. E. Kerwin
date accessioned2017-05-08T23:38:49Z
date available2017-05-08T23:38:49Z
date copyrightJune, 1992
date issued1992
identifier issn0098-2202
identifier otherJFEGA4-27067#214_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/110450
description abstractA ducted propeller model was tested in the MIT water tunnel. A hub apparatus was designed which allowed for the duct and propeller forces to be measured separately. The forces on the duct and propeller were measured over a range of advance coefficients. Velocities were measured upstream and downstream from the duct using a Laser Doppler Velocimetry system. Using these velocities the experimental values for the spanwise distribution of circulation on the propeller blades were then calculated. The experimental results were compared to the results from a propeller lifting surface/duct and hub surface panel analysis code over the same range of advance coefficients showing very good agreement for the duct and propeller forces and the circulation in the region of attached flow.
publisherThe American Society of Mechanical Engineers (ASME)
titleExperimental Validation of a Ducted Propeller Analysis Method
typeJournal Paper
journal volume114
journal issue2
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.2910018
journal fristpage214
journal lastpage219
identifier eissn1528-901X
keywordsPropellers
keywordsDucts
keywordsForce
keywordsFlow (Dynamics)
keywordsWater tunnels
keywordsBlades AND Laser Doppler anemometry
treeJournal of Fluids Engineering:;1992:;volume( 114 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record