Show simple item record

contributor authorYukio Sano
contributor authorKoji Tokushima
contributor authorTokujiro Inoue
date accessioned2017-05-08T23:36:19Z
date available2017-05-08T23:36:19Z
date copyrightNovember, 1991
date issued1991
identifier issn0094-9930
identifier otherJPVTAS-28330#560_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/109023
description abstractIn the present paper, the multishock compaction process of a die-contained copper powder medium supported by an elastic plug at one end and impacted by an elastic punch at the other end, is analyzed by means of an improved theory having the effect of elasticity of the punch and plug. The compactions computed first have a constant sum of lengths of the medium and plug S0 * =110, a constant ratio of punch mass to powder mass filled in the die M* =20, and an initial punch velocity ν0 =50m/s. The computations of the compactions for the medium with very short lengths and the plug with long lengths confirm the existence of the medium length Scr1 * corresponding to the first critical plug-length found in the previous study, and support the compaction process and the final mean density ρmean *-initial medium length S* relation of the medium shorter than the length Scr1 * which were inferred in the study. Furthermore, the effect of elastic waves in the punch and plug on the process of the medium longer than Scr1 * are examined. There are one common factor and one significant different factor in the processes. Explicitly, the waves in the plug exert different influence on compaction processes of the medium with different lengths, whereas the waves in the punch have similar influence on the processes. The elastic waves in the plug and die wall friction cause the medium length Scr2 * corresponding to the second critical plug-length inferred in the previous study. Moreover, the waves in the plug make the form of the computed relation curve more complicated than the inferred one. The computed curve has the lengths Scr3 * and Scr4 * at which the density has an extreme value, respectively. Approximate similarity conditions for the compactions with various values of S0 * are given by two fixed parameters M* and ν0 in region S* <Scr1 * , three fixed parameters S* /S0 * , M* , and ν0 in region from Scr1 * to small S* where the wall friction effect can be neglected, and three fixed parameters S* , M* , and ν0 in region S* >(1/2)S0 * . The computed ρmean * –S* and ρmean * –S* /S0 * relations support these conditions. Furthermore, the computations of the compactions reveal that the waves in the punch, medium, and plug behave in similar manner during the processes, though they have different strengths.
publisherThe American Society of Mechanical Engineers (ASME)
titleMultishock Compactions of a Die-Contained Copper Powder Medium Analyzed by Improved Theory
typeJournal Paper
journal volume113
journal issue4
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.2928796
journal fristpage560
journal lastpage569
identifier eissn1528-8978
keywordsCopper powders
keywordsWaves
keywordsCompacting
keywordsDensity
keywordsElastic waves
keywordsComputation
keywordsFriction AND Elasticity
treeJournal of Pressure Vessel Technology:;1991:;volume( 113 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record