Show simple item record

contributor authorG. Bandyopadhyay
contributor authorK. D. Moergenthaler
contributor authorK. W. French
contributor authorD. J. Sordelet
date accessioned2017-05-08T23:35:27Z
date available2017-05-08T23:35:27Z
date copyrightOctober, 1991
date issued1991
identifier issn1528-8919
identifier otherJETPEZ-26691#643_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/108506
description abstractSince 1984, GTE Laboratories Inc. has performed research to develop net shape fabrication technology for axial silicon nitride rotors for the Daimler-Benz research gas turbine engine. The initial effort was focused on the fabrication of injection-molded profile disks. Subsequently, efforts were shifted to develop injection molding and slip casting technology for the bladed gasifier rotors. This joint activity has demonstrated that the ceramics technology has improved significantly over the last five years, as is evidenced by a major improvement in properties and performance of silicon nitride components. The evolution of the ceramics fabrication technology at GTE and the role of improved process and NDE methods on components fabricated in recent years are described in this paper.
publisherThe American Society of Mechanical Engineers (ASME)
titleFabrication and Development of Axial Silicon Nitride Gas Turbine Rotors
typeJournal Paper
journal volume113
journal issue4
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.2906289
journal fristpage643
journal lastpage649
identifier eissn0742-4795
keywordsManufacturing
keywordsSilicon nitride ceramics
keywordsGas turbines
keywordsRotors
keywordsCeramics
keywordsDisks
keywordsShapes
keywordsInjection molding
keywordsNondestructive evaluation AND Slip casting (Process)
treeJournal of Engineering for Gas Turbines and Power:;1991:;volume( 113 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record