Show simple item record

contributor authorY.-Y. Wang
contributor authorW. R. Lloyd
contributor authorW. G. Reuter
contributor authorD. M. Parks
contributor authorJ. Epstein
date accessioned2017-05-08T23:34:27Z
date available2017-05-08T23:34:27Z
date copyrightDecember, 1991
date issued1991
identifier issn0021-8936
identifier otherJAMCAV-26335#895_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/107927
description abstractDetailed three-dimensional nonlinear finite element (FE) analyses and experimental moire studies are performed on a plate containing a moderately deep part-through surface crack to establish limits of HRR-dominance. The plate is subjected to predominantly far-field tensile loading. The material under investigation is ASTM A710 steel, which was constitutively modeled by large deformation J 2 flow theory of plasticity. The FE mesh was carefully constructed to resolve both crack front fields (such as J -integral and CTOD) and global fields (such as surface displacements, strains). By comparing the J-integral and CTOD results with an earlier HRR-dominance study using (small strain) deformation theory of plasticity, we found little effect of the different formulations on the crack front fields. The global deformation fields from the numerical simulation are in good agreement with our experimental results. The eventual loss of HRR-dominance is intimately related to the interaction of the global plastic flow fields with those of the crack front.
publisherThe American Society of Mechanical Engineers (ASME)
titleElastic-Plastic Deformation in Surface-Cracked Plates: Experiment and Numerical Analysis
typeJournal Paper
journal volume58
journal issue4
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.2897703
journal fristpage895
journal lastpage903
identifier eissn1528-9036
keywordsDeformation
keywordsNumerical analysis
keywordsPlates (structures)
keywordsFracture (Materials)
keywordsPlasticity
keywordsFlow (Dynamics)
keywordsSteel
keywordsComputer simulation
keywordsSurface cracks
keywordsASTM International AND Finite element analysis
treeJournal of Applied Mechanics:;1991:;volume( 058 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record