Show simple item record

contributor authorA. E. Blach
contributor authorV. S. Hoa
contributor authorC. K. Kwok
contributor authorA. K. W. Ahmed
date accessioned2017-05-08T23:33:32Z
date available2017-05-08T23:33:32Z
date copyrightFebruary, 1990
date issued1990
identifier issn0094-9930
identifier otherJPVTAS-28317#50_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/107430
description abstractDesign Rules in the ASME Code, Section VIII, Division 1, cover the design of unreinforced and reinforced rectangular pressure vessels. These rules are based on “infinitely long” vessels of non-circular cross section and stresses calculated are based on a linearized “small deflection” theory of plate bending. In actual practice, many pressure vessels can be found which are of finite length, often operating successfully under pressures two to three times as high as those permitted under the Code rules cited. This paper investigates the effects of finite length on the design formulae given by the ASME Code, and also a design method based on “large deflection” theory coefficients for short rectangular pressure vessels. Results based on analysis are compared with values obtained from finite element computations, and with experimental data from strain gage measurements on a test pressure vessel.
publisherThe American Society of Mechanical Engineers (ASME)
titleRectangular Pressure Vessels of Finite Length
typeJournal Paper
journal volume112
journal issue1
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.2928587
journal fristpage50
journal lastpage56
identifier eissn1528-8978
keywordsPressure vessels
keywordsDesign
keywordsDeflection
keywordsASME Standards
keywordsMeasurement
keywordsStress
keywordsFormulas
keywordsStrain gages
keywordsVessels
keywordsDesign methodology
keywordsFinite element analysis AND Computation
treeJournal of Pressure Vessel Technology:;1990:;volume( 112 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record