Show simple item record

contributor authorJohn G. Papastavridis
date accessioned2017-05-08T23:31:40Z
date available2017-05-08T23:31:40Z
date copyrightDecember, 1990
date issued1990
identifier issn0021-8936
identifier otherJAMCAV-26328#1004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/106364
description abstractThis paper formulates the simplest possible, or canonical, form of the Lagrangean-type of equations of motion of holonomically constrained mechanical systems. This is achieved by introducing a new special set of n holonomic (system) coordinates in terms of which the m ( < n) holonomic constraints are expressed in their simplest, or uncoupled, form: the first m of these new coordinates vanish; the remaining (n-m) (nonvanishing) new coordinates of the (n-m) degree-of-freedom system are then independent. From the resulting equations of motion: (a) The last (n-m) are reactionless canonical equations (the holonomic counterpart of the linear or nonlinear equations, either of Maggi (in the old variables), or of Boltzmann/Hamel (in the new variables)) whose solution yields the motion, while (b) the first m supply the system reactions, in the old or new coordinates, once the motion is known. Special forms of these equations and a simple example are also given. The geometrical interpretation of the above, in modern vector/linear algebra language is summarized in the Appendix.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Maggi or Canonical Form of Lagrange’s Equations of Motion of Holonomic Mechanical Systems
typeJournal Paper
journal volume57
journal issue4
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.2897618
journal fristpage1004
journal lastpage1010
identifier eissn1528-9036
keywordsEquations of motion
keywordsEquations
keywordsMotion
keywordsLinear algebra
keywordsNonlinear equations AND Degrees of freedom
treeJournal of Applied Mechanics:;1990:;volume( 057 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record