Show simple item record

contributor authorJ. S. Lamancusa
contributor authorK. B. Todd
date accessioned2017-05-08T23:31:29Z
date available2017-05-08T23:31:29Z
date copyrightApril, 1989
date issued1989
identifier issn1048-9002
identifier otherJVACEK-28981#199_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/106269
description abstractInduction noise has become a major source of consumer complaints in automobiles powered by four-cylinder engines. Induction noise typically manifests itself as a low frequency booming or “mooing.” It is most noticeable and objectionable under wide open throttle, hard acceleration conditions. In an effort to understand the basic causes of this noise, so that potential remedies might be more intelligently applied, an extensive study was undertaken. Careful measurements were made on a four-cylinder, motored engine. Dynamic pressure variations within the induction system, and external to the engine were studied. Peak to peak pressure variations of over 2 psi were found in the intake runners at the valves. Evidence of nonlinear acoustic behavior was found. A detailed examination of the events that cause induction noise is presented.
publisherThe American Society of Mechanical Engineers (ASME)
titleAn Experimental Study of Induction Noise in Four-Cylinder Internal Combustion Engines
typeJournal Paper
journal volume111
journal issue2
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.3269842
journal fristpage199
journal lastpage207
identifier eissn1528-8927
keywordsElectromagnetic induction
keywordsNoise (Sound)
keywordsInternal combustion engines
keywordsCylinders
keywordsEngines
keywordsPressure
keywordsMeasurement
keywordsAcoustics
keywordsValves AND Automobiles
treeJournal of Vibration and Acoustics:;1989:;volume( 111 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record