Show simple item record

contributor authorP. Cawley
contributor authorR. Ray
date accessioned2017-05-08T23:28:48Z
date available2017-05-08T23:28:48Z
date copyrightJuly, 1988
date issued1988
identifier issn1048-9002
identifier otherJVACEK-28978#366_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/104756
description abstractThe changes in the natural frequencies of a beam produced by cracks have been compared with those caused by slots of the same depth and different widths. It has been shown both theoretically and experimentally that the natural frequency changes produced by a defect of a given depth increase as the width of the defect is increased. This means that if tests with machined slots are to be used to investigate whether a crack of a particular depth can be detected in a nondestructive test based on natural frequency measurements, it is essential to correct the results of the tests with the slots to allow for the finite width of the slots. The results presented here can be used for this purpose.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Comparison of the Natural Frequency Changes Produced by Cracks and Slots
typeJournal Paper
journal volume110
journal issue3
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.3269527
journal fristpage366
journal lastpage370
identifier eissn1528-8927
keywordsFracture (Materials)
keywordsFrequency AND Measurement
treeJournal of Vibration and Acoustics:;1988:;volume( 110 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record