Show simple item record

contributor authorS. G. Papaioannou
date accessioned2017-05-08T23:27:32Z
date available2017-05-08T23:27:32Z
date copyrightNovember, 1988
date issued1988
identifier issn1087-1357
identifier otherJMSEFK-27733#359_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/104100
description abstractA new method is proposed for cutting large module spur gears on NC milling machines, using end milling cutters. End milling eliminates undercutting and leads to a significant reduction of tooling costs. The method relies on the motion of a simple geometry tool rather than the shape of an expensive form tool to generate the gear profile. The tool center path is defined and computed for the standard 20 deg full-depth system. Tool steps are generated by a highly precise interpolation algorithm. The practical aspects of the method are also investigated to establish its feasibility. The computation of the maximum tool size shows that sufficient tool rigidity can be secured for gear modules greater than or equal to 10 mm. The Lewis equation is used to investigate the beam strength of the resulting tooth profile and generate data for the design process. Gears made by end milling are shown to be comparable in strength to those produced by shaping or hobbing.
publisherThe American Society of Mechanical Engineers (ASME)
titleManufacture of High Precision Spur Gears With End Milling Cutters
typeJournal Paper
journal volume110
journal issue4
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3187895
journal fristpage359
journal lastpage366
identifier eissn1528-8935
keywordsGears
keywordsAccuracy
keywordsMilling
keywordsSpur gears
keywordsStiffness
keywordsMachining centers
keywordsTooling
keywordsShapes
keywordsMotion
keywordsAlgorithms
keywordsDesign
keywordsComputation
keywordsCutting
keywordsEquations
keywordsGeometry AND Interpolation
treeJournal of Manufacturing Science and Engineering:;1988:;volume( 110 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record