Show simple item record

contributor authorR. G. Teyssandier
contributor authorZ. D. Husain
date accessioned2017-05-08T23:25:02Z
date available2017-05-08T23:25:02Z
date copyrightJune, 1987
date issued1987
identifier issn0098-2202
identifier otherJFEGA4-27027#144_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/102611
description abstractWall and plate pressure gradients were investigated in a 3.5 in. (89 mm) air flow orifice meter facility for 3 orifice plates covering a pipe Reynolds number range of 21,000 to 160,000. The influence of the orifice plate on the upstream wall pressure gradient extended to 0.62D location. It was also found that the pressure gradient is a weak function of the orifice plate β ratio. The downstream location of the minimum pressure point located at about 3.3 dam heights. The pressure gradient on the face of the orifice plate shows that the deflection calculation based on any differential pressure taps is conservative.
publisherThe American Society of Mechanical Engineers (ASME)
titleExperimental Investigation of an Orifice Meter Pressure Gradient
typeJournal Paper
journal volume109
journal issue2
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.3242634
journal fristpage144
journal lastpage148
identifier eissn1528-901X
keywordsPressure gradient
keywordsPressure
keywordsDams
keywordsAir flow
keywordsReynolds number
keywordsPipes
keywordsPlates (structures) AND Deflection
treeJournal of Fluids Engineering:;1987:;volume( 109 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record