Show simple item record

contributor authorC. F. Beards
contributor authorA. Woowat
date accessioned2017-05-08T23:21:31Z
date available2017-05-08T23:21:31Z
date copyrightJanuary, 1985
date issued1985
identifier issn1048-9002
identifier otherJVACEK-28964#26_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/100596
description abstractSome effects of friction damping occurring in joints on the frequency response of a portal frame are presented and discussed. The frame was designed so that the joint clamping forces could be varied, allowing some control of the friction damping caused by interfacial slip in the joints. It was found that a joint clamping force less than that required to tightly fasten a joint gave a minimum frame response: reducing the clamping force from 15 kN to 320 N caused a reduction in frame response of 21 dB. Some changes in resonance frequencies were also observed.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Control of Frame Vibration by Friction Damping in Joints
typeJournal Paper
journal volume107
journal issue1
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.3274711
journal fristpage26
journal lastpage32
identifier eissn1528-8927
keywordsFriction
keywordsDamping
keywordsVibration
keywordsStructural frames
keywordsForce
keywordsResonance
keywordsGates (Closures)
keywordsFrequency
keywordsFrequency response AND Knudsen number
treeJournal of Vibration and Acoustics:;1985:;volume( 107 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record