| contributor author | Y. Ariga | |
| contributor author | S. Nagata | |
| date accessioned | 2017-05-08T23:20:47Z | |
| date available | 2017-05-08T23:20:47Z | |
| date copyright | December, 1985 | |
| date issued | 1985 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-28059#565_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/100162 | |
| description abstract | A new W-N gear tooth profile is developed. The gear developed has an addendum of circular arc and a dedendum of involute curve. This particular tooth profile is believed to solve the problem of conventional W-N gear profile—that is, the profile is sensitive to center distance variations. No pitting on the gear was observed even after 1 × 107 revolutions cycle during the laboratory test using a pair of gear having specified values of M n (normal module) = 4, β (helix angle) = 30 deg, and Lloyd’s K factor at 8 MPa. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Load Capacity of a New W-N Gear With Basic Rack of Combined Circular and Involute Profile | |
| type | Journal Paper | |
| journal volume | 107 | |
| journal issue | 4 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.3260764 | |
| journal fristpage | 565 | |
| journal lastpage | 572 | |
| identifier eissn | 1528-9001 | |
| keywords | Stress | |
| keywords | Gears | |
| keywords | Cycles AND Gear teeth | |
| tree | Journal of Mechanical Design:;1985:;volume( 107 ):;issue: 004 | |
| contenttype | Fulltext | |
