| contributor author | Takashi Ueda | |
| contributor author | Akira Hosokawa | |
| contributor author | Akira Yamamoto | |
| date accessioned | 2017-05-08T23:20:40Z | |
| date available | 2017-05-08T23:20:40Z | |
| date copyright | May, 1985 | |
| date issued | 1985 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27713#127_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/100110 | |
| description abstract | The temperature of cutting grains on wheel surface was measured by means of a new method, in which an optical fiber accepts the infrared flux radiated from the cutting grains and transmits it to an infrared detector InAs cell. This pyrometer makes it possible to observe the history of each cutting grain on the wheel surface. It was found that the temperature of cutting grains at 4.2 ms after cutting is distributed in the range of 500°C to 1400°C, and their mean temperature is 820°C. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Studies on Temperature of Abrasive Grains in Grinding—Application of Infrared Radiation Pyrometer | |
| type | Journal Paper | |
| journal volume | 107 | |
| journal issue | 2 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.3185975 | |
| journal fristpage | 127 | |
| journal lastpage | 133 | |
| identifier eissn | 1528-8935 | |
| keywords | Temperature | |
| keywords | Infrared radiation | |
| keywords | Grinding | |
| keywords | Pyrometers | |
| keywords | Cutting | |
| keywords | Wheels | |
| keywords | Optical fiber AND Sensors | |
| tree | Journal of Manufacturing Science and Engineering:;1985:;volume( 107 ):;issue: 002 | |
| contenttype | Fulltext | |
