Search
CSV
RISAn Experimental Study of Mist/Air Film Cooling on a Flat Plate With Application to Gas Turbine Airfoils—Part I: Heat Transfer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Film cooling is a cooling technique widely used in highperformance gas turbines to protect the turbine airfoils from being damaged by hot flue gases. Motivated by the need to further improve film cooling in terms of both ...
An Experimental Study of Mist/Air Film Cooling On a Flat Plate With Application to Gas Turbine Airfoils—Part II: Two Phase Flow Measurements and Droplet Dynamics
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A phase Doppler particle analyzer (PDPA) system is employed to measure the twophase mist flow behavior including flow velocity field, droplet size distribution, droplet dynamics, and turbulence characteristics. Based on ...
Simulation of Char Dust Combustion Inside a Pyroscrubber Downstream of a Petroleum Coke Calcining Kiln
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A pyroscrubber is a furnace used in the petroleum coke calcining industry to recover energy from the carbonaceous contents, including char dust and hydrocarbon volatiles of the exhaust gas from ...
On the Ideal Grid Resolution for Two Dimensional Eulerian Modeling of Gas–Liquid Flows
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A study was performed to investigate the interesting observation that when using an Eulerian–Eulerian model to simulate a bubble column flow in two dimensions, accuracy did not always increase with increasing grid ...
Geometric Closure Control of the Main Channel Girder of Jiaxing-Shaoxing Bridge
Publisher: American Society of Civil Engineers
Abstract: The main channel girder of Jiaxing-Shaoxing Bridge is the first six-tower, separate-deck, space four-cable-plane cable-stayed bridge in the world. The main bridge has seven closures, and the closure scheme is complex. ...
Validation of a Two-Phase CFD Air/Mist Film Cooling Model With Experimental Details—Part I: Development of an Experimental Test Facility
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Film cooling is a cooling technique widely used in high-performance gas turbines to protect the turbine airfoils from being damaged by hot flue gases. Motivated by the need to further improve the turbine hot section cooling ...
Thermal Analysis and Simulation of Auxiliary Bearings and Its Application in the High Temperature Reactor 10
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The auxiliary bearing is applied to provide mechanical uphold for the rotational dropping rotor when contact event happens due to the active magnetic bearing (AMB) failure emergencies. During the rotor drop process, the ...
Dynamic Analysis for the Rotor Drop Process and Its Application to a Vertically Levitated Rotor/Active Magnetic Bearing System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Active magnetic bearings (AMBs) have been utilized widely to support high-speed rotors. However, in the case of AMB failure, emergencies, or overload conditions, the auxiliary bearing is chosen as the backup protector to ...
Mining and Analyzing the Evolution of Public Opinion in Extreme Disaster Events from Social Media: A Case Study of the 2022 Yingde Flood in China
Publisher: American Society of Civil Engineers
Abstract: AbstractNatural disasters have caused significant economic losses and casualties. Obtaining
detailed disaster information and understanding public opinion during disasters are
crucial for devising effective policies and ...
Influence of Heat and Mass Transfer Processes on the Electrochemical Performance of Proton Exchange Membrane Fuel Cell
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. To investigate the influence of internal heat-mass transfer processes on the electrochemical performance of proton exchange membrane fuel cell (PEMFC), a three-dimensional multiphysics coupling model is developed ...