Search
CSV
RISA Method to Design and Optimize Axial Flow Cyclones for Gas–Liquid Separation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article provides a detailed design guide, optimization, and performance assessment for air–water separation of an axial flow cyclone. Axial flow cyclones (also known as swirl tube demisters, mist eliminators, or ...
Performance and Sustainability of Carbon-Sequestration Foamed Concrete Utilizing CO2 Gas, Abandoned Soil, and Waste Serpentine
Publisher: American Society of Civil Engineers
Abstract: AbstractA sustainable foamed concrete is proposed in this study which incorporates serpentine
tailings, MgO, abandoned soil, and CO2 foam for backfilling abandoned urban underground spaces, and is called carbon ...
A Novel Reverse Swirl Generator Concept for Enhancing the Rotordynamic Stability of Annular Gas Seals Utilizing the Intrinsic Energy of Leakage Flow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. Circumferential flow is the major cause of rotordynamic instability in annular gas seals, and antiswirl techniques are widely adopted to mitigate this issue. Conventional solutions such as swirl brakes have proven ...
Modeling of a Roll-to-Roll Packaging Process Using System Identification and Deep Learning
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. Linear models, with parameters derived from physics-based formulations or learned through linear system identification techniques, are commonly applied to characterize disturbance propagation in roll-to-roll ...
A Compact Experimentally Validated Model of Magnetorheological Fluids
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Magnetorheological (MR) dampers are one of the most promising devices for mitigation of vibration of engineering structures due to earthquakes and wind excitation. In this paper, a compact twocolumn model of an MR fluid ...
Experimental Study on the Dynamic Characteristic of Soft Soil under Cyclic Loads
Publisher: American Society of Civil Engineers
Abstract: To study the change law of the dynamic characteristics of soft soil, particularly the inadequate bearing capacity of highway and railway roadbeds induced by traffic loads, the soft soil in Yingkou area was taken as the ...
Multimanipulator Robotic System for Ultrasound Tomography: Design, Calibration, and Image Results
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this article, we present the design, validation, and imaging capabilities of a mechanically discretized ultrasound scanning apparatus (MEDUSA) that supports flexible development of ultrasound tomography (UST) algorithms ...
Urbanization-Induced Increases in Heavy Precipitation are Magnified by Moist Heatwaves in an Urban Agglomeration of East China
Publisher: American Meteorological Society
Additive Manufacturing of a High Temperature, Ni-Based Superalloy Compact Heat Exchanger: A Study on the Role of Select Key Printing Parameters
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Compared to state-of-the-art heat exchangers, manifold-microchannel heat exchangers have shown superior heat removal density (kW/kg) at moderate pressure drops. However, manifold-microchannel heat exchangers made of Ni-based ...
Effects of Process Variants on Residual Stresses in Wire Arc Additive Manufacturing of Aluminum Alloy 5183
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Development of residual stress of high magnitude, to the extent of material yield strength and in some cases higher than yield strength, is one of the major challenges faced by components produced using the wire arc additive ...