Search
CSV
RISEvaluation of the Lidar–Radar Cloud Ice Water Content Retrievals Using Collocated in Situ Measurements
Publisher: American Meteorological Society
Abstract: emote sensing and in situ measurements made during the Colorado Airborne Multiphase Cloud Study, 2010?2011 (CAMPS) with instruments aboard the University of Wyoming King Air aircraft are used to evaluate lidar?radar-retrieved ...
Shear Bonding and Thermal Properties of Particle-Filled Polymer Grout for Pipe-in-Pipe Application
Publisher: American Society of Civil Engineers
Abstract: Pipe-in-Pipe (PIP) configurations are considered as a practical solution to deepwater oil production to prevent hydrate formation and paraffin deposition during the transportation of crude oil to production facilities. The ...
Design of a Lightweight Hyper-Redundant Deployable Binary Manipulator
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents the design of a new lightweight, hyper-redundant, deployable Binary Robotic Articulated Intelligent Device (BRAID), for space robotic systems. The BRAID is intended to meet ...
Numerical Modeling of Suction and Trench Formation at the Touchdown Zone of Steel Catenary Riser
Publisher: American Society of Civil Engineers
Abstract: Steel catenary risers (SCR) are widely used in deepwater oil and gas production. The riser–seabed–water interaction near the touchdown zone is one of the main concerns in the design of fatigue life of SCR. During upward ...
Numerical Modeling of Suction and Trench Formation at the Touchdown Zone of Steel Catenary Riser
Publisher: American Society of Civil Engineers
Abstract: Steel catenary risers (SCR) are widely used in deepwater oil and gas production. The riser–seabed–water interaction near the touchdown zone is one of the main concerns in the design of fatigue life of SCR. During upward ...
Penetration of Steel Catenary Riser in Soft Clay Seabed: Finite-Element and Finite-Volume Methods
Publisher: American Society of Civil Engineers
Abstract: The penetration of steel catenary risers and other cylindrical objects, such as offshore pipelines or T-bar penetrometers, in a soft clay seabed is of practical importance in deepwater oil and gas development. Finite-element ...
Development and Validation of the HDI Matrix Method for Fluid–Dam Interaction
Publisher: American Society of Civil Engineers
Abstract: This paper presents the theoretical development of a practical numerical method for analysis of complex dam-reservoir interaction problems. The proposed approach takes advantage of the combination of boundary and finite ...
Effect of Bond Layer on Bimaterial Assembly Subjected to Uniform Temperature Change
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: When two thin plates or layers are bonded together, an extremely thin bond layer of third material exists between the two layers. This research work examines the effect of bond layer on the ...
Simulation and Validation of Fluid Inertia Effects in External Gear Machines Using Lumped Parameter Modeling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Lumped parameter modeling is a consolidated technique for analyzing the fluid dynamic behavior of positive displacement machines, owing to their computational swiftness and the ease of integrating other physical domains ...
Enhanced Durability of Chromium-Primed MoS2 Coatings on Aluminum for Aerospace Flap Rail Slider Pads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. Molybdenum disulfide (MoS2) is a widely used solid lubricant due to its excellent low-friction performance under dry sliding conditions. However, its practical application on aluminum substrates, such as those ...