Search
Now showing items 1-10 of 10
Laboratory Investigation of Different Standards of Phase Separation in Crumb Rubber Modified Asphalt Binders
Publisher: American Society of Civil Engineers
Abstract: The phase separation between polymer additives and virgin asphalt binders during hot storage is an important issue in the asphalt industry. Traditionally, it has been customary to evaluate the degree of phase separations ...
Characterization of Recycled Aged RAP Binders Containing Crumb Rubber Modifier Using Gel Permeation Chromatography
Publisher: American Society of Civil Engineers
Abstract: The recycling of hot-mix asphalt pavements containing a crumb rubber modifier (CRM) has been an area of interest since CRM was first used in asphalt paving materials over
Effects of Compaction Temperature on Volumetric Properties of Rubberized Mixes Containing Warm-Mix Additives
Publisher: American Society of Civil Engineers
Abstract: The warm-mix asphalt (WMA) refers to technologies that allow a significant reduction of mixing and compaction temperatures of asphalt mixes through lowering the viscosity of asphalt binders. Several studies have been carried ...
HP-GPC Characterization of Rejuvenated Aged CRM Binders
Publisher: American Society of Civil Engineers
Abstract: The recycling of reclaimed asphalt pavement (RAP) is typically achieved by adding a rejuvenating agent into the mix. The addition of the rejuvenating agent leads to adjusting the compositions and consequently improving the ...
Influence of Warm Mix Additives on PMA Mixture Properties
Publisher: American Society of Civil Engineers
Abstract: The objective of the study in this paper was to investigate the influence of warm mix additives on polymer-modified asphalt (PMA) mixtures in regards to engineering properties. Twelve PMA mixtures (four control PMA mixtures ...
Micromorphology and Rheology of Warm Binders Depending on Aging
Publisher: American Society of Civil Engineers
Abstract: In this paper, the micromorphology of asphalt binders with wax warm additives is investigated by atomic force microscopy (AFM) and optical microscopy before and after aging. Performance grade (PG) 64-22 asphalt binder is ...
Comparison of Field Performance of Crack Treatment Methods in Asphalt Pavement of Texas
Publisher: American Society of Civil Engineers
Abstract: Crack sealing and crack filling treatments have always been an important consideration to prolong the life of pavement among all pavement maintenance programs. Crack sealing uses a router to cut the crack to provide a ...
Effect of FT Paraffin Wax Contents on Performance Properties of Crumb Rubber–Modified Asphalt Binders
Publisher: American Society of Civil Engineers
Abstract: The performance properties of rubberized asphalt binders at high, intermediate, and low temperatures were evaluated as a function of Fischer–Tropsch (FT)–paraffin wax content. The rubberized binders were blended using five ...
Laboratory Study of the Effects of Compaction on the Volumetric and Rutting Properties of CRM Asphalt Mixtures
Publisher: American Society of Civil Engineers
Abstract: The compaction conditions (e.g., compaction temperature and compaction level) of crumb rubber modified (CRM) asphalt mixtures should be determined carefully because the viscosity and amount of the CRM binder affects the ...
Quantification of Oxidative Aging of Polymer-Modified Asphalt Mixes Made with Warm Mix Technologies
Publisher: American Society of Civil Engineers
Abstract: This research investigates the oxidative aging levels of polymer-modified asphalt (PMA) mixes using gel permeable chromatography (GPC), which can help to simplify the quantification of asphalt aging. Warm-mix asphalt (WMA) ...
CSV
RIS