Search
CSV
RISEffect on Wear Performance of ZrO2 Amount of 316L Stainless Steel Matrix Composites Produced by a Mechanical Alloying Method
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigated the wear performances of ZrO2 reinforced 316L stainless steel matrix composite materials. The 316L matrix was mechanically alloyed by adding three different amounts (1 wt%, 2 wt%, and 3 wt%) of ZrO2 ...
Evaluation of Nusselt Number for a Flow in a Parallel Plates Using Magnetohydrodynamics Second-Order Slip Model
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study is the examination of magnetohydrodinamics (MHD) flow and heat transfer between microparallel plates with constant wall heat flux using two different boundary condition coefficients, widely known in the literature, ...
Dynamic Analysis of Eccentrically Prestressed Damped Beam under Moving Harmonic Force Using Higher Order Shear Deformation Theory
Publisher: American Society of Civil Engineers
Abstract: The dynamic behavior of an eccentrically prestressed simply supported beam under a moving harmonic force is studied by using the higher order shear deformation theory in this paper. The prestressed tendon is assumed straight ...
The Wear Performance at High Temperatures of ZrO2-Reinforced Aluminum Matrix Composites Produced by Mechanochemical Reaction Method
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this study, high-temperature wear performance of A356+Gr-ZrO2 aluminum matrix composites (AMCs) produced by the mechanochemical reaction method was investigated. After the aluminum composite powders were cold-pressed ...
One-Dimensional Aerodynamic Heating and Ablation Prediction
Publisher: American Society of Civil Engineers
Abstract: A simplified method is developed to calculate aerodynamic heating, ablation, and structural temperature response for a body traveling at high speeds. Mach number, altitude, and angle of attack are used as a function of ...
Evaluation of Epoxidized Soybean Oil as a Green Admixture for Biobased Polymer–Impregnated Cement Pastes: Comparison with Dioctyl Terephthalate
Publisher: ASCE
Abstract: Biobased green plasticizers are preferred in the production of plastics in light of the environmental and human health issues posed by traditional plasticizers. Epoxidized soybean oil is an environmentally friendly admixture ...
Optimization of Nanofiller-Blended Cementitious Composites Using Macrostructural and Microstructural Analyses
Publisher: ASCE
Abstract: Microcracks inevitably occur over time in cement composites, and they pose a threat to the safety and durability of concrete structures, especially when environmental conditions are considered. Microstructural analysis can ...
Investigation of the Effect of High-Purity Terephthalic Acid Obtained by Hydrolysis of PET Bottle Wastes on the Cementitious Composite Properties
Publisher: American Society of Civil Engineers
Abstract: One of the effective approaches to waste polyethylene terephthalate (w-PET) disposal is chemolysis, and terephthalic acid (TPA) is preferred due to its rigid and stable structure recycling product and its rigid properties. ...
Modeling of Granular Flow and Combined Heat Transfer in Hoppers by the Discrete Element Method (DEM)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The discrete element method can be used for modeling moving granular media in which heat and mass transport takes place. In this paper the concept of discrete element modeling with special ...
Closure to “<i>Design of Hydraulic Jump Chambers</i>” by Scott F. Korom, Simsek Sarikelle, and Andrew L. Simon (March/April 1990, Vol. 116, No. 2)
Publisher: American Society of Civil Engineers