Abstract: Inverters are a crucial component in electric vehicle drivetrains, and this work attempts to develop and study a thermal management system for inverter cooling. This study aims to develop a low-cost, simple, closed-loop ...

Abstract: A simple method of computing the planar elastic buckling loads, natural frequencies, and corresponding mode shapes for arches and tied arches has been developed. The proposed method is applicable to arches and tied arches ...

Abstract: Some commercial units and industries need more amount of cooling than the power such as cold storage, shopping complex, etc. In this work, a new cooling cogeneration cycle (Srinivas cycle) has been proposed and solved to ...

Abstract: A model for uniform parallel flow over the surface of a rectangular source of heat on a conducting plate is used to demonstrate the use of analytic Green’s functions to formulate the conjugate ...

Abstract: Analytical solutions are presented for the temperature field that arises from the application of a source of heat on an adiabatic plate or board when the fluid is represented as a uniform ...

Abstract: The handling of changes of phase in perturbation treatments of two-phase nozzle flow requires particular care. Droplet solidification, the phase change considered here, introduces two novel ...

Abstract: Fretting fatigue behavior of a titanium alloy was investigated using a dual actuator test setup which was capable to apply the pad displacement independent of the applied cyclic load on specimen. ...

Abstract: “Disproportionate collapse” is structural collapse disproportionate to the cause; it is often, though not always, progressive, where “progressive collapse” is the collapse of all or a large part of a structure precipitated ...

Abstract: Libration orbit stationkeeping controls are designed based on selected reference quasi-periodic orbit trajectories. The baseline trajectory is designed to meet science requirements and in the same time achieve minimum fuel ...