Search
CSV
RISModeling and Validation of Rotational Vibration Responses for Accessory Drive Systems—Part I: Experiments and Belt Modeling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental and modeling techniques for belt longitudinal static stiffness, longitudinal dynamic stiffness and damping coefficient, bending stiffness, and friction coefficient between a pulley and a belt are presented. ...
Modeling and Validation of Rotational Vibration Responses for Accessory Drive System—Part II: Simulations and Analyses
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This is the second part of the paper for modeling and validation of the rotational vibration responses for an accessory drive system. The unified formulas for modeling the rotational vibration of an accessory drive system ...
Predicted Thermal Stresses in a Trimaterial Assembly With Application to Silicon Based Photovoltaic Module
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Lowtemperature thermally induced stresses in a trimaterial assembly subjected to the change in temperature are predicted based on an approximate structural analysis (strengthofmaterials) analytical (“mathematicalâ€) ...
Dynamic Impact Experiment and Numerical Simulation of Frozen Soil with Prefabricated Holes
Publisher: ASCE
Abstract: To explore the effects of holes and other defects on the dynamic mechanical properties of frozen soil under impact loading, frozen soil samples with three types of circular hole defects and different apertures were developed, ...
Inelastic Deformation and Fatigue of Solder Alloys Under Complicated Load Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fundamental study of deformation and fatigue fracture behavior of solder alloys under complex load conditions is a key to enabling implementation of sophisticated three-dimensional (3D) time-dependent ...
Investigation of a New Lead Free Solder Alloy Using Thin Strip Specimens
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The thermomechanical behaviors of a new lead free solder and eutectic 63Sn37Pb are investigated in this paper. A series of tests including tensile, creep, and fatigue, are carried out on a ...
Experimental Characterizations and Estimation of the Natural Frequency of Nonlinear Rubber Damped Torsional Vibration Absorbers
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The natural frequency of a rubberdamped torsional vibration absorber (TVA) depends on the excitation amplitudes and frequencies in a highly nonlinear manner. This is due to nonlinear shear properties of the rubber ring. ...
Numerical Study of Consolidation Effect on the Response of Passive Piles Adjacent to Surcharge Load
Publisher: American Society of Civil Engineers
Abstract: Piles subject to soil lateral movement are often referred to as passive piles. The response of passive piles in clayey soils adjacent to surcharge is not only dependent on the soil intrinsic behavior but also on the loading ...
Robust Design Optimization of Component Parameters for DMDEB Powertrain System Based on Taguchi Method
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The selection of component parameters plays an important role in the energy optimization of dual-motor drive electric buses (DMDEBs). To design a set of parameters that can be robust to different road slopes, passenger ...
A 3D Canopy Radiative Transfer Model for Global Climate Modeling: Description, Validation, and Application
Publisher: American Meteorological Society
Abstract: he process of solar radiative transfer at the land surface is important to energy, water, and carbon balance, especially for vegetated areas. Currently the most commonly used two-stream model considers the plant functional ...