Search
Now showing items 1-7 of 7
Experimental Based Redesigns for Trailing Edge Film Cooling of Gas Turbine Blades
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Magnetic resonance imaging experiments have provided the threedimensional mean concentration and three component mean velocity field for a typical trailing edge filmcooling cutback geometry built into a conventional ...
New Evaluation Method for Liquefaction of Ground Using Dynamic Liquefaction Analysis Method and Its Application
Publisher: American Society of Civil Engineers
Abstract: Nankai megathrust earthquakes are expected to occur with a return period of approximately 90–200 years along the fault of the Nankai Trough. Because they are interplate earthquakes, it is predicted that they will cause ...
New Evaluation Method for Liquefaction of Ground Using Dynamic Liquefaction Analysis Method and Its Application
Publisher: American Society of Civil Engineers
Abstract: Nankai megathrust earthquakes are expected to occur with a return period of approximately 90–200 years along the fault of the Nankai Trough. Because they are interplate earthquakes, it is predicted that they will cause ...
Cyclic Elastoviscoplastic Constitutive Model for Clay Considering Nonlinear Kinematic Hardening Rules and Structural Degradation
Publisher: American Society of Civil Engineers
Abstract: A cyclic elastoviscoplastic constitutive model for clayey soils is proposed based on the nonlinear kinematic hardening rules and considering the structural degradation. The performance of the model is verified through the ...
Thermal Stresses of Through Silicon Vias and Si Chips in Three Dimensional System in Package
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thermal conduction and mechanical stresses in through silicon via (TSV) structures in three dimensional system in package (3D SiP) under device operation condition were discussed. A large scale ...
Three Dimensional Velocity and Scalar Field Measurements of an Airfoil Trailing Edge With Slot Film Cooling: The Effect of an Internal Structure in the Slot
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measurements of the 3D velocity and concentration fields were obtained using magnetic resonance imaging for a pressureside cutback film cooling experiment. The cutback geometry consisted of rectangular slots separated by ...
CSV
RIS