Search
Now showing items 1-9 of 9
Absorption Heat Pump Performance Improvement Through Ground Coupling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present study investigates the improvement in the performance of an absorption heat pump for residential space-conditioning due to the use of the ground as the heat source in the heating ...
Commercial Boiler Waste-Heat Utilization for Air Conditioning in Developing Countries
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates the utilization of waste heat from commercial process steam boilers for air conditioning using absorption cooling systems. An ammonia-water generator absorber heat exchange ...
Robust State Estimation for Linear Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Real-time state estimation of a linear dynamic system using an observer, in the presence of modeling errors in the system model used by the observer and uncertainty in the initial system ...
Application of Repetitive Control to Eccentricity Compensation in Rolling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Repetitive control is applied here to compensate for roll eccentricity disturbances in thickness control of the cold rolling process. A unique aspect of the process is that the eccentricity ...
Transient Response of Repetitive Control Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Upper bounds on transient response magnitudes for a SISO continuous-time repetitive control system are derived. Limiting the size of these transients is shown to be related to limiting the ...
Erratum: “An Experimentally Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Noncircular Microchannels,” [Journal of Fluids Engineering, 2003, 125, pp. 887–894]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: 1. By convention, pressure drop is treated as a positive value. Therefore, Eq. (11) should be as follows, i.e., without the negative sign on the right-hand side:
Erratum: “An Experimentally Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Circular Microchannels,” [Journal of Fluids Engineering, 2002, 124, pp. 205–214]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: 1. By convention, most of the equations in this paper treat pressure drop as a negative value. For consistency, the following equations should have the negative signs added as shown below: ...
An Experimentally Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Circular Microchannels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper reports the development of an experimentally validated model for pressure drop during intermittent flow of condensing refrigerant R134a in horizontal microchannels. Two-phase pressure ...
Diffusion Driven Desalination for Simultaneous Fresh Water Production and Desulfurization
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The diffusion driven desalination (DDD) process has been previously introduced as a process for distilling water using low-grade waste heat. Here, a configuration of the DDD process is introduced ...
CSV
RIS