Search
CSV
RISReheat Air Brayton Combined Cycle Power Conversion Off Nominal and Transient Performance
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Because molten fluoride salts can deliver heat at temperatures above 600 آ°C, they can be used to couple nuclear and concentrating solar power heat sources to reheat air combined cycles (RACC). With the openair configuration ...
Reheat Air Brayton Combined Cycle Power Conversion Design and Performance Under Nominal Ambient Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Modern large air Brayton gas turbines have compression ratios ranging from 15 to 40 resulting in compressor outlet temperatures ranging from 350 آ°C to 580 آ°C. Fluoridesaltcooled, hightemperature reactors, molten salt ...
Multiscale Transient Thermal, Hydraulic, and Mechanical Analysis Methodology of a Printed Circuit Heat Exchanger Using an Effective Porous Media Approach
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Printed circuit heat exchangers (PCHE) and the similar formed plate heat exchangers (FPHE) offer highly attractive economics due to their higher power densities when compared to more conventional shellandtube designs. ...
Ni Interlayer to Improve Low-Pressure Diffusion Bonding of 316L SS Press Fit Tube-to-Tubesheet Joints for Coiled Tube Gas Heaters
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study suggests a new approach to diffusion bonding (DB) 316L stainless steel: a low-pressure procedure that includes a nickel interlayer. In this approach, relatively lower pressure is applied to the sample before the ...