Search
Now showing items 1-10 of 11
Explicit Solutions for the Antiplane Problem of Bonded Dissimilar Materials with Two Concentric Circular-Arc Inclusions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A general solution to the antiplane problem of two concentric circular-arc inclusions in bonded dissimilar materials is provided. Based upon the Hilbert problem formulation and the technique of ...
Thermoelastic Contact Between a Flat Punch and an Anisotropic Half-Space
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fundamental nature of thermoelastic contact between a flat punch and an anisotropic half-plane solid is studied. Based on Lekhnitskii’s stress potentials and anisotropic thermoelasticity theory, ...
The Effect of Solder Paste Volume and Reflow Ambient Atmosphere on Reliability of CBGA Assemblies
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: To investigate the effect of stencil thickness and reflow ambient atmosphere on the reliability of ceramic ball grid array (CBGA) assemblies, three levels of stencil thickness, 0.10, 0.15, and ...
Application of Hydroelastic Waves to the Removal of Small Gallstones
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: We have used hydroelastic waves to remove small gallstones in hepatic and common bile ducts. These stones were shaken off by the action of progressive and reflected traveling waves. The ...
Using Activated Carbon to Reduce the Volatile Organic Compounds from Bituminous Materials
Publisher: American Society of Civil Engineers
Abstract: The objective of this research is to characterize the reduction of volatile organic compounds (VOCs) from bituminous materials resulted from activated carbon. A gas chromatography-mass spectrometer (GC-MS) was used to ...
The Fahraeus Effect in Sheet Flows With a Gap Thickness of 4 to 36 μm
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: We measured the Fahraeus effect of blood flowing in a sheet flow model formed with two glass slides. The number of red blood cells in the sheet flow was counted to determine a sheet ...
Effect of Fiber Orientation and Strain Rate on the Nonlinear Uniaxial Tensile Material Properties of Tendon
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Tendons are exposed to complex loading scenarios that can only be quantified by mathematical models, requiring a full knowledge of tendon mechanical properties. This study measured the anisotropic, ...
Take-Off and Landing Using Ground-Based Power-Simulation of Critical Landing Load Cases Using Multibody Dynamics<sup>1</sup>
Publisher: American Society of Civil Engineers
Abstract: A novel take-off and landing system using ground-based power is proposed in the EU-FP7 project GABRIEL. The main feature of this system is the complete removal of the landing gear from civil aircraft. The proposed system ...
Take-Off and Landing Using Ground-Based Power-Simulation of Critical Landing Load Cases Using Multibody Dynamics<sup>1</sup>
Publisher: American Society of Civil Engineers
Abstract: A novel take-off and landing system using ground-based power is proposed in the EU-FP7 project GABRIEL. The main feature of this system is the complete removal of the landing gear from civil aircraft. The proposed system ...
Effect of Coarse Aggregate Morphologies on the Hydrodynamic Pressure–Resulted Moisture Susceptibility of Asphalt Mixtures
Publisher: ASCE
Abstract: Many pavement field distresses are caused by moisture damage. However, hydrodynamic pressure is not taken into account by a common laboratorial moisture test of asphalt mixture. Furthermore, aggregate morphology was not ...
CSV
RIS