Abstract: This paper shows a simple correlation between elastic and inelastic dynamic pipework responses enabling realistic/pessimistic prediction of dynamic pipework responses beyond the elastic range using ...

Abstract: The structural design of sealed insulating glass units for wind loads involves complex structural mechanics procedures that address load sharing between two glass lites that vary in thickness, dimensions, and heat treatments. ...

Abstract: This paper presents a simplified window glass design procedure (SWGDP) as an alternative to the comprehensive window glass design procedure described in ASTM E 1300, “Standard practice for determining the load resistance ...

Abstract: ASTM E1300-09 uses a glass failure prediction model (GFPM) to quantify the probability that a critical surface flaw with a certain location and orientation will initiate a facture in the glass for a given lite geometry and ...

Abstract: ASTM E 1300-07 employs only two glass type factors to adjust the load resistance of annealed glass for heat treatment, one factor for heat-strengthened glass and one factor for tempered glass. The use of only two factors ...

Abstract: When an explosive threat exists building owners should strongly consider using blast-resistant glazing in windows and curtain walls. Architects and engineers have no publicly available tools, procedures, or formal guidelines ...

Abstract: When blasts occur in urban areas, many injuries and sometimes deaths result when glass shards fly from windows fractured by airblast pressure. The use of blast-resistant glazing can mitigate the number and severity of ...