Search
CSV
RISRole of Oxidizer Mixture Composition on Stabilizing Stratified Oxy-Flames in Dual Lean Premixed Combustors for Gas Turbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates the effects of oxidizer composition on stability and combustion and emission characteristics of stratified premixed CH4-O2-CO2 flames in a dual annular counter-rotating swirl (DACRS) burner for wider ...
Stability and NOx Emissions of Oxy-Ammonia Swirl Premixed Flames in an Emissions-Controlled Gas Turbine Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. This study provides a design-relevant numerical analysis of ammonia–oxygen (NH3/O2) combustion, focusing on the effects of inlet preheating (298–520 K), equivalence ratio (φ = 0.7–1.2), and bulk flow velocity ...
Boilers Optimal Control for Maximum Load Change Rate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In many cogeneration systems, one or more boilers are used in hot standby to meet the plant demand of steam in case of failure or upset in the cogeneration unit. Such boilers need to quickly respond to sudden and large ...
Numerical Predictions of Three-Dimensional Unsteady Turbulent Film-Cooling for Trailing Edge of Gas-Turbine Blade Using Large Eddy Simulation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work investigates the performance of film-cooling on trailing edge of gas turbine blades using unsteady three-dimensional numerical model adopting large eddy simulation (LES) turbulence scheme in a low Mach number ...
Numerical Predictions of Three-Dimensional Unsteady Turbulent Film-Cooling for Trailing Edge of Gas-Turbine Blade Using Large Eddy Simulation
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: This work investigates the performance of film-cooling on trailing edge of gas turbine blades using unsteady three-dimensional numerical model adopting large eddy simulation (LES) turbulence scheme in a low Mach number ...
Stability and Combustion/Emission Characteristics of Stratified Dual-Swirl Oxy-Methane Flames: Effects of Oxygen Fraction
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The stability, combustion, and emission features of stratified oxy-methane (CH4/O2/CO2) flames stabilized over a dual annular counter-rotating swirl (DACRS) burner, developed for gas turbine combustion applications, were ...
Stratified and Hydrogen Combustion Techniques for Higher Turndown and Lower Emissions in Gas Turbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This review overviews combustion technologies for reduced emissions and better fuel economy in the industrial gas turbine. Lean premixed combustion (LPM) technology is introduced as a low-temperature combustion technique ...
Stratified Flames in Dual Annular Counter-Rotating Swirl Burner for Wider Operability Gas Turbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates numerically the effects of equivalence ratio (Φ) on flow/flame interactions and emissions of stratified oxy-methane (CH4/O2/CO2) flames in a dual annular counter-rotating swirl (DACRS) burner for ...
Enhancing Hydrogen Production in a Porous Reactor for the Steam Methane Reforming: Optimizing Operating Parameters and Radiation Heat Transfer Mechanism
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effects of operating parameters and radiation heat transfer mechanism on the performance of a porous catalytic reactor for hydrogen production by steam methane reforming (SMR) were investigated numerically. User-defined ...
Ammonia-Fueled Gas Turbines Toward Affordable and Clean Energy Production: A Review
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. Amidst the heightened global awareness of climate change, discourse has shifted decisively toward the ambitious vision of a carbon-free economy. This paradigm shift imposes even more rigorous criteria for selecting ...