Search
Now showing items 1-10 of 296
Vibration of Cams Having Two Degrees of Freedom
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The vibration analysis of cam-follower systems is extended to models having two degrees of freedom. Two models are considered, one in which the cam support is rigid and the follower has two ...
Discussion: “The Influence of Linear and Rotating Motions on the Friction of Polymers” (Briscoe, B. J., and Stolarski, T. A., 1981, ASME J. Lubr. Technol., 103, pp. 503–507)
Publisher: The American Society of Mechanical Engineers (ASME)
Syrinx Fluid Transport: Modeling Pressure-Wave-Induced Flux Across the Spinal Pial Membrane
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Syrinxes are fluid-filled cavities of the spinal cord that characterize syringomyelia, a disease involving neurological damage. Their formation and expansion is poorly understood, which has hindered ...
Some Problems in High-Temperature Bearing Materials
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Bearings which are lubricated by process fluids are being considered for application at temperatures exceeding 1000 deg F. Although under static conditions, nickel-base alloys offer an excellent ...
Fracture of Abrasive Grain in Grinding
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fracture strength of single grits of alumina abrasive grain, as observed while cutting mild steel, was measured as a function of the grain depth of cut, the tangential force during cutting, ...
Analysis of the Stiffness and Damping Characteristics of an Externally Pressurized Porous Gas Journal Bearing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The dynamic behavior of an externally pressurized porous gas journal bearing is analyzed by assuming one dimensional flow through porous wall. A periodic (displacement) disturbance is imposed on ...
Analysis of Dynamic Tilt Stiffness and Damping Coefficients of Externally Pressurized Porous Gas Journal Bearings
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A theoretical estimate of dynamic characteristics in terms of stiffness and damping of an externally pressurized gas-lubricated porous journal under tilting mode of vibration is made. The governing ...
Relaxation of Thick-Walled Cylinders and Spheres
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Using the nonlinear creep law proposed by Soderberg, closed-form solutions are derived for the relaxation of incompressible thick-walled spheres and cylinders in plane strain. These solutions ...
Discussion: “Surface Topography Changes in Polymer-Metal Sliding—II” (Jain, V. K., and Bahadur, S., 1983, ASME J. Lubr. Technol., 105, pp. 526–531)
Publisher: The American Society of Mechanical Engineers (ASME)
Discussion: “The Unlubricated Sliding Wear Behavior of Polyetheretherketone Against Smooth Mild-Steel Counterfaces” (Ovaert, T. C., and Cheng, H. S., 1991, ASME J. Tribol., 113, pp. 150–157)
Publisher: The American Society of Mechanical Engineers (ASME)
CSV
RIS