Search
CSV
RISMechanics of Fractal-Inspired Horseshoe Microstructures for Applications in Stretchable Electronics
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fractal-inspired designs represent an emerging class of strategy for stretchable electronics, which have been demonstrated to be particularly useful for various applications, such as stretchable batteries and biointegrated ...
Numerical Simulation of Frosting on Fin-and-Tube Heat Exchanger Surfaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Frost on heat exchanger fin surfaces increases the thermal resistance and blocks the air flow passages, which reduce the system energy efficiency. Therefore, investigations of frost formation especially simulations of ...
Motor Bearing Fault Diagnosis in an Industrial Robot Under Complex Variable Speed Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Motor bearing is the key vulnerable part of the servomotor in an industrial robot, which is always arranged at the joint that is the main load area. In the movement process of the robot, motor bearing bears a great impact ...
Observed Upper Deep Branch of the Pacific Meridional Overturning Circulation North of New Guinea
Publisher: American Meteorological Society
Performance of a Pipe–Soil System under Cyclic Loading: An Experimental and Theoretical Study
Publisher: American Society of Civil Engineers
Abstract: AbstractPipeline damage due to traffic load has increased in recent years. A series of laboratory
model tests were conducted to understand the behavior of buried pipelines under traffic
loads dry sand was used. Sinusoidal ...
Effect of Alkali-Activated Dolomite Tailings as an Additive on the Pavement Performance of Asphalt Mixtures at Medium-to-High Temperatures
Publisher: American Society of Civil Engineers
Abstract: AbstractAlkali-activated dolomite tailings (ADTs) possess the unique ability to generate whiskers
in hot-mix asphalt, thereby significantly enhancing the adhesion and high-temperature
deformation resistance of asphalt ...
Model Test Investigation of Eccentric Load Effect on a Gully Installed Circular Culvert
Publisher: American Society of Civil Engineers
Abstract: AbstractSome mountainous areas have a relative height difference of up to 2 km and an average
slope of more than 13°, and most high-fill culverts are laid asymmetrically, resulting
in uneven distribution of earth ...
Synergistic Lubrication for Textured Surfaces Using Polar and Nonpolar Lubricants
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The synergistic effect of surface texturing and lubricants with various viscosity and polarity properties is an attractive and unexplored topic. In this study, surface texturing characterized by circular dimples has been ...
TiO2 Nanolayer–Coated Carbon as Pt Support for Enhanced Methanol Oxidation Reaction
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: To facilitate the large-scale application of direct methanol fuel cells (DMFCs), the issue of low Pt/C durability due to Pt degradation and carbon corrosion in harsh DMFC operating conditions must be addressed. A promising ...
Post-Buckling Analysis of Curved Beams
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stretchability of the stretchable and flexible electronics involves the post-buckling behaviors of internal connectors that are designed into various shapes of curved beams. The linear displacement–curvature relation is ...