Search
Now showing items 1-10 of 1375
Experimental and Theoretical Studies for the Behavior of Strip Footing on Oil-Contaminated Sand
Publisher: American Society of Civil Engineers
Abstract: This paper presents the results of a series of plain-strain model tests carried out on both clean sand and oil-contaminated sand loaded with a rigid strip footing. The objectives of this study are to determine the influence ...
A Generalization of Plastic Flow Theory With Application to Cyclic Hardening and Softening Phenomena
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A generalization of current theories of plasticity is developed. The theory, applicable to arbitrary multiaxial loading histories, requires a strain controlled uniaxial cyclic experiment to specify ...
Global Energy in the Different Spectral Bands at Dhahran, Saudi Arabia
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Global, spectral isolation data measured every minute over a four-year period at Dhahran (26° 32′ N, 50° 13′ E) Saudi Arabia, using five Schott filters with cutoff at “285, 500, 530, ...
Mechanical Properties of Simulated Deep Permafrost
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Creep tests were performed on frozen and unfrozen 20–40 mesh sand to evaluate the viscoelastic and yield properties of simulated deep permafrost. Overburden pressure associated with permafrost ...
Uplift Behavior of Vertical Piles Embedded in Oil-Contaminated Sand
Publisher: American Society of Civil Engineers
Abstract: There are several problems when dealing with oil-contaminated soil that affect environmental quality and alter the geotechnical properties of the soil. The influence of oil contamination on the uplift performance of model ...
Appropriate Thermodynamic Performance Measures for Closed Systems for Thermal Energy Storage
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Several definitions of energy and exergy efficiency for closed systems for thermal energy storage (TES) are developed and discussed. A simple model is utilized in which heat quantities are ...
Temperature Distribution Inside a Solar Collector Storage Tank of Finite Wall Thickness
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A mathematical model for the transient conjugated behavior of a hot-water storage tank having finite wall thickness is presented. An analytical closed-form solution for the temperature field ...
Shakedown of Steel Plates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Standard mathematical programming techniques are used for obtaining the shakedown load and stochastic shakedown load of a simply supported axisymmetric plate subjected to uniform pressure. The ...
Exergy Analysis of Combined Cycles: Part 1—Air-Cooled Brayton-Cycle Gas Turbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Quantitative analytical tools based on the second law of thermodynamics provide insight into the complex optimization tradeoffs encountered in the design of a combined cycle. These tools are ...
Development of a Two Matrix Model for Thermal Analysis of a Multichip Module
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The customary one-dimensional thermal resistance model used for single chip modules is not well suited for use with multichip modules. In this paper, it is proposed to model a multichip module ...
CSV
RIS