Abstract: In this study three-dimensional simulations of a stator vane passage flow have been performed using the v2¯−f turbulence model. Both an in-house code (CALC-BFC ) and the commercial software ...

Abstract: This work derives and applies a method for the investigation of numerical accuracy in computational fluid dynamics. The method is used to investigate discretization errors in computations of ...

Abstract: The techniques of selected area electron channeling and positive replica examination have been used to study the plastic zones attending fatigue crack propagation in 304 SS, 6061-T6 aluminum ...

Abstract: The plastic zones associated with single overloads of cyclically loaded specimens have been mapped using electron channeling patterns. The zones are asymmetric with respect to the crack tip, and ...

Abstract: Large eddy simulation of flow past a rigid prism of a square cross section with one side facing the oncoming flow at Re=2.2×104 is performed. An incompressible code is used employing an ...

Abstract: In the above paper, Eq. (4) was printed incorrectly. The correct equation appears below:

Abstract: A comparison of the elastic-plastic crack-tip fields of large and small fatigue cracks has been made using the ΔJ-integral approach. Using experimental strain and displacement range measurements ...

Abstract: This paper describes a novel oscillatory-flow mixer consisting of a pair of flexible chambers connected by a perforated plate, or septum. During operation, the septum undergoes reciprocating ...