Search
CSV
RISAnalysis of Heavily Loaded Tilted Pads Thrust Bearings With Large Dimensions Under TEHD Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Huge thrust bearings with centrally pivoted and tilted pads operating under heavy loads are analzyed using the (thermoelastohydrodynamic) TEHD-theory. The Reynolds equation, the energy equation of ...
Analysis of Hydrostatic Journal Bearings With End Seals
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An approximate analysis for the pressure field and dynamic force coefficients in turbulent flow, centered hydrostatic journal bearings (HJBs) with fluid inertia and liquid compressibility effects ...
Discussion: “Use of a Tracer to Determine Contribution of a Power Plant to Suspended Particulate Levels” (Frankenberg, T. T., Collins, G. F., and McGrail, D. W., 1977, ASME J. Eng. Power, 99, pp. 335–340)
Publisher: The American Society of Mechanical Engineers (ASME)
Some Questions Regarding the Interaction of Creep and Fatigue
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Data are presented from fatigue-crack growth tests conducted on Type 304 S.S. in inert environments at elevated temperatures which show that the thermal-activation noted in similar tests run in ...
The Relationship Between Stress Intensity Factor, Crack Opening Displacement and J-Integral in Zr-2.5 Percent Nb
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Crack opening displacement (COD) has been determined in Zr-2.5 percent Nb over a wide range of applied stress intensity, K. Prior to initiation of crack extension, COD was determined from ...
Erratum: “An Analytical Rolling Model Including Through Thickness Shear Stress Distributions” (Journal of Engineering Materials and Technology, 1984, 106, pp. 1–8)
Publisher: The American Society of Mechanical Engineers (ASME)
Fatigue-Crack Growth Behavior in Fast-Neutron-Irradiated Ferritic Steels and Weldments
Publisher: The American Society of Mechanical Engineers (ASME)
Flow Effects on the Solidification Environment in a GTA Spot Weld
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The ultimate aim in the simulation of weld pools is to depict the final state of the solidified metal. Solidification history determines the metallurgical state, and can be partially derived ...
An Analytical Rolling Model Including Through Thickness Shear Stress Distributions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An extension of the slab method of analysis as applied to rolling is presented. The von Mises yield criterion, including shear stresses, is written in terms of the frictional boundary condition ...
Parameter Selection for Multiple Fault Diagnostics of Gas Turbine Engines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An introduction to the fundamentals of turbine engine multiple fault diagnosis and its relationship to engine parameter selection and measurement requirements is presented. The influence of the ...