Search
Now showing items 1-10 of 38
Frequency Domain Stability Criteria for Distributed Parameter Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: For distributed parameter systems, open-loop stability in the sense of bounded outputs for bounded inputs, and closed-loop asymptotic stability are considered. Frequency domain stability criteria ...
Optimum Control of Linear Systems With Transportation Lag
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A necessary condition for the optimum control of a linear system with input delay or transportation lag is derived in terms of the system weighting function. For a general quadratic integrand ...
Response of Infinite Beams on Geosynthetic-Reinforced Granular Bed over Soft Soil with Stone Columns under Moving Loads
Publisher: American Society of Civil Engineers
Abstract: This paper pertains to the development of a simplified model for an infinite beam subjected to a concentrated load moving with constant velocity and resting on geosynthetic-reinforced granular bed over soft soil improved ...
Effect of Footing Width on Bearing Capacity Factor Nγ for Smooth Strip Footings
Publisher: American Society of Civil Engineers
Abstract: By incorporating the variation of soil friction angle
On the Stability of a Class of Distributed, Sampled-Data Nonlinear Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A frequency domain stability criterion (sufficient condition) for a class of distributed parameter, sampled-data systems containing a memoryless, nonlinear feedback element is presented. This criterion ...
An Experimental Investigation of the Dynamic Performance of a Vertical Application Three Lobe Bearing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Dynamic performance test results are provided for a verticalapplication threelobe bearing, geometrically similar to a threelobe bearing tested by Leader et al. (2010, “Evaluating and Correcting Subsynchronous Vibration ...
An Experimental Study of the Load Orientation Sensitivity of Three Lobe Bearings
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Static and dynamic performance test results are provided for a threelobe bearing evaluated over the following range of radial staticload orientations (taken from the leading edge of the loaded pad): 0 deg, 20 deg, ...
Uplift Capacity of Axially Loaded Piles in Clays
Publisher: American Society of Civil Engineers
Abstract: The present study aims at determining the uplift capacity of axially loaded piles in clays whose undrained cohesion increases linearly with depth. With the application of the axisymmetric static limit analysis approach, ...
Finite-Element Limit Analysis of Strip and Circular Skirted Footings on Sand
Publisher: American Society of Civil Engineers
Abstract: The lower- and upper-bound theorems of the limit analysis have been used in conjunction with finite elements and second-order cone programming (SOCP) for determining the bearing capacity of strip and circular skirted ...
CSV
RIS