Search
Now showing items 1-10 of 13
On the Simple Tension of an Anisotropic Semi-Infinite Plate With Partially Stiffened Edge
Publisher: The American Society of Mechanical Engineers (ASME)
A Fractal Interfacial Entrainment Model for Dry Convective Boundary Layers. Part II: Discussion of Model Behavior and Comparison with Other Models
Publisher: American Meteorological Society
Abstract: Details of the fractal interfacial entrainment (FIE) model recently presented by Kamada are compared to those of previous models, water tank results, and atmospheric data from the Wangara experiment. Effects of capping inversion resolution...
A Fractal Interfacial Entrainment Model for Dry Convective Boundary Layers. Part I: Model Description
Publisher: American Meteorological Society
Abstract: An entrainment model for the convective planetary boundary layer is presented. It is based upon an ensemble-averaged view of the local entrainment interface that caps the convective mixed layer. Fractal and variational ...
Studies on a Horizontal Axis Wind Turbine With Passive Pitch-Flap Mechanism (Performance and Flow Analysis Around Wind Turbine)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes the development of a passive system to control the output power of a horizontal axis wind turbine. This pitch-flap coupling mechanism can reduce rotor power above rated ...
Surface Pressure Distribution on a Blade of a 10 m Diameter HAWT (Field Measurements versus Wind Tunnel Measurements)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper exploits blade surface pressure data acquired by testing a three-bladed upwind turbine operating in the field. Data were collected for a rotor blade at spanwise 0.7R with the rotor ...
Rotor Blade Sectional Performance Under Yawed Inflow Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study shows the results of pressure distribution measurements on a rotor blade of a horizontal axis wind turbine under various yawed operations. The experiments are carried out in a wind ...
Rotor Configuration Effects on the Performance of a HAWT With Tip-Mounted Mie-Type Vanes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, the relationships between the power augmentation of a HAWT due to Mie-type tip vane application and other factors influencing the efficiency of a wind turbine such as the blade ...
Evaluation of Bond Properties in Concrete Repair Materials
Publisher: American Society of Civil Engineers
Abstract: Bond quality is an important factor that affects the performance of repaired members. In patching repair, interfacial cracking and delamination due to the shrinkage of repair materials are often observed. In this study, ...
Fracture Toughness of Microfiber Reinforced Cement Composites
Publisher: American Society of Civil Engineers
Abstract: An investigation into the reinforcing behavior of microdiameter fibers in cement composites, with an emphasis on their behavior in the frontal process zone (FPZ) ahead of the crack tip, is presented. Fracture toughness ...
Boundary-Layer Transition across a Stratocumulus Cloud Edge in a Coastal Zone
Publisher: American Meteorological Society
Abstract: We examine the lateral transition from a stratocumulus-covered boundary layer to a clear-sky convective boundary layer during onshore flow in a coastal environment, using both mobile sodar observations and a numerical ...
CSV
RIS