Search
Now showing items 1-6 of 6
Impact of Turbine-Strut Clocking and Turbine Outlet Swirl on the Heat Transfer and Film Cooling in an Aggressive Turbine Center Frame
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study focuses on the thermal impact of the clocking position of the high-pressure turbine (HPT) vanes with respect to the turbine center frame (TCF) struts and the thermal impact of the HPT outlet swirl. The TCF is a ...
Impact of Blowing and Density Ratio on the Film Cooling and Heat Transfer in an Aggressive Turbine Center Frame
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: It was shown in the previous study that the aft purge flows from the last stage of the high-pressure turbine (HPT) have a significant film cooling potential in the downstream turbine center frame (TCF) (Jagerhofer et al., ...
Heat Transfer Measurements in a Turbine Center Frame at Realistic Mach Number—Part I: Baseline Study
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. This paper investigates heat transfer in a turbine center frame (TCF), a transition duct that guides the flow from the high-pressure to the low-pressure turbine. Experimental results were acquired in a high-speed ...
The Influence of Purge Flow Parameters on Heat Transfer and Film Cooling in Turbine Center Frames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The imperative improvement in the efficiency of turbofan engines is commonly facilitated by increasing the turbine inlet temperature (TIT). This development has reached a point where also components downstream of the ...
Heat Transfer Measurements in a Turbine Center Frame at Realistic Mach Number—Part II: Influence of Combustor Hot Streaks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. This article investigates heat transfer in a turbine center frame (TCF), focusing on the effects of combustor temperature non-uniformities, more commonly referred to as hot streaks (HSs). It is a continuation of ...
A Sector-Cascade Test Rig for Measurements of Heat Transfer in Turbine Center Frames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The turbine center frame (TCF) is an inherent component of turbofan aircraft engines and is used for connecting the high-pressure turbine (HPT) to the low-pressure turbine (LPT). Its position immediately downstream of the ...
CSV
RIS