Search
CSV
RISA Survey of Studies Into the Hydrodynamic Response of Fluid-Coupled Circular Cylinders
Publisher: The American Society of Mechanical Engineers (ASME)
Historical Development of a Standard to Reduce Risk From Pressure Systems Failure–Part I: The ASME HPS Section 6000
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The ASME HPS Standard Section 6000 (as well as Sections 1000 to 5000) was begun with a draft outline in 1981 and released in 2003. Section 6000 “Hazardous Release Protection” of the High ...
Historical Development of a Standard to Reduce Risk From Pressure Systems Failure— Part II: The ASME HPS-2003 Section 6000 “Hazardous Release Protection”
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The ASME High Pressure System (HPS) Standard Section 6000 (as well as Sections 1000–5000) was begun with a draft outline in 1981 and released in 2003. Section 6000 “Hazardous Release Protection” ...
Approximate Stiffness Matrix for Tapered Beams
Publisher: American Society of Civil Engineers
Abstract: A method for finding a modified bending stiffness matrix for a member of varying section is presented. The assumption is made that the displacement function for a uniform beam may be used as an approximation to the correct ...
Water-Column Separation at Two Pumping Plants
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Results of field measurement of transients in two pump discharge lines show that the pressures were greater than had been predicted during design, and a theory and method of analysis are ...
Closure to “<i>Approximate Stiffness Matrix for Tapered Beams</i>” by Christopher J. Brown (December, 1984, Vol. 110, No. 2)
Publisher: American Society of Civil Engineers
Impact, Fragmentation, and Blast (PVP Special Publication, Vol. 82)
Publisher: The American Society of Mechanical Engineers (ASME)
Energy Release Protection for Pressurized Systems. Part II: Review of Studies Into Impact/Terminal Ballistics
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In order to assess whether or not there is a need for protection against the failure of a pressure system, the engineer must evaluate the hazards associated with rupture. The hazards are ...
Energy Release Protection for Pressurized Systems. Part I: Review of Studies into Blast and Fragmentation
Publisher: The American Society of Mechanical Engineers (ASME)
A Finite Plate Method to Solve Cylinder-to-Cylinder Structures Subjected to Internal Pressure
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An axisymmetric geometric assumption combined with the use of asymmetric loading conditions is presented as an inexpensive alternative to 3-D geometric stress analysis of a variety of nozzle-to-cylinder ...