Search
Now showing items 1-8 of 8
Mineral Dissolution and the Evolution of k0
Publisher: American Society of Civil Engineers
Abstract: Adequate knowledge of the in situ state of stress can be essential to the analysis of geotechnical systems. However, the measurement and prediction of
Long-Term Foundation Response to Repetitive Loading
Publisher: American Society of Civil Engineers
Abstract: Repetitive loading can induce volumetric and shear strain accumulation in soils and affect the long-term performance of engineered and natural geosystems. A hybrid numerical scheme based on the FEM is implemented to analyze ...
Novel Combustion Instability Diagnosis Method With Upstream Pulsation of Repetitive Laser-Induced Plasmas
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this experimental study, we are presenting the ability of laser-induced plasmas with successive pulsation to identify combustion instabilities (CI) of a premixed lab-scale combustor. An acoustic disturbance equivalent ...
Simplified Analysis for Preliminary Design of Towers in Suspension Bridges
Publisher: American Society of Civil Engineers
Abstract: This paper proposes an equivalent suspension bridge model for the preliminary design of support towers of suspension bridges. In this simplified model, the bridge is composed of its support towers, with equivalent springs ...
Novel Combustion Instability Diagnosis Method With Upstream Pulsation of Repetitive Laser-Induced Plasmas
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this experimental study, we are presenting the ability of laser-induced plasmas with successive pulsation to identify combustion instabilities (CI) of a premixed lab-scale combustor. An acoustic disturbance equivalent ...
Fabrication and Characterization of Anode-Supported Planar Solid Oxide Fuel Cell Manufactured by a Tape Casting Process
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A planar anode-supported electrolyte was fabricated using a tape casting method that involved a single step cofiring process. A standard NiO∕8YSZ cermet anode, 8mol% YSZ electrolyte, and a ...
Fabrication Characteristics of SOFC Single Cell Using Nanocrystalline 1Ce10ScSZ Electrolyte Powder prepared by Co-Precipitation Process
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Nanocrystalline ceria-doped scandia-stabilized zirconia (1Ce10ScSZ) powders were prepared via the co-precipitation process for solid oxide fuel cell. The effects of the calcination temperature on ...
Effect of Permeate Flux and Backwashing on Quorum Sensing and Quenching within Biocake Layer in Membrane Bioreactor
Publisher: ASCE
Abstract: Filtration and backwashing during the operation of a membrane bioreactor (MBR) physically induce the cyclic attachment and detachment of microbes on the membrane surface. Thus, permeate flux and backwashing affect the ...
CSV
RIS