Search
CSV
RISImproving Asphalt Emulsion Mixtures Properties Containing Cementitious Filler by Adding GGBS
Publisher: American Society of Civil Engineers
Mechanical Behavior of a New Base Material Containing High Volumes of Limestone Waste Dust, PFA, and APC Residues
Publisher: American Society of Civil Engineers
Abstract: The results of research are reported in this work that evaluated the benefits of the stabilization of Type 1 subbase material to which had been added a high volume of limestone quarry waste dust. There is extensive interest ...
Laboratory Studies to Examine the Properties of a Novel Cold-Asphalt Concrete Binder Course Mixture Containing Binary Blended Cementitious Filler
Publisher: American Society of Civil Engineers
Performance Analysis of a Cold Asphalt Concrete Binder Course Containing High-Calcium Fly Ash Utilizing Waste Material
Publisher: American Society of Civil Engineers
Abstract: It has been established that cold bituminous emulsion mixtures (CBEMs) have a comparatively low initial strength in comparison to hot mix asphalt (HMA); however its superior performance with regard to carbon emissions, is ...
Mechanical Properties of an Upgrading Cold-Mix Asphalt Using Waste Materials
Publisher: American Society of Civil Engineers
Abstract: Considerable advantages could be achieved if the cold bituminous emulsion mixtures (CBEMs) show comparable engineering properties to hot-mix asphalt (HMA), particularly because CBEMs require no heat within the manufacture ...
Development of Sustainable Cold Rolled Surface Course Asphalt Mixtures Using Waste Fly Ash and Silica Fume
Publisher: American Society of Civil Engineers
Abstract: The reduction of hot asphalt mixtures for the usage and development of sustainable supplementary cold asphalt mixtures (CAMs) for the construction of road and highway surface layers is a major issue for researchers around ...
Characterizing Cold Bituminous Emulsion Mixtures Comprised of Palm Leaf Ash
Publisher: American Society of Civil Engineers
Abstract: Cold bitumen emulsion mixtures (CBEMs) are a promising substitute for hot mix asphalt (HMA) due to their low environmental impact, cost effectiveness, and low energy production costs. Nevertheless, conventional CBEM has ...
Characterizing Cold Bituminous Emulsion Mixtures Comprised of Palm Leaf Ash
Publisher: American Society of Civil Engineers
Abstract: Cold bitumen emulsion mixtures (CBEMs) are a promising substitute for hot mix asphalt (HMA) due to their low environmental impact, cost effectiveness, and low energy production costs. Nevertheless, conventional CBEM has ...
Microwave Spectroscopy for the Analysis of Absorption Properties of Treated Waste Rubber Aggregates
Publisher: American Society of Civil Engineers
Abstract: This paper discusses for the first time the use of noninvasive and nondestructive microwave spectroscopy to analyze the effect of chemical treatment on the absorption properties of waste rubber aggregate material when it ...