Search
Now showing items 1-10 of 150
On the Analytical Determination of the Nominal Stresses in Dovetail Attachments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Simple physical models are developed for the nominal contact stresses in dovetail attachments. These nominal stresses include the pressure, the shear traction, and the bending stress in the contact region, both during ...
On the Singular Eigenfunctions for Plane Harmonic Problems in Composite Regions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper is concerned with the singular behavior of harmonic functions at the vertex of a plane, composite, wedge region. Separable harmonic functions which include logarithmic terms are ...
Effect of Internal Pressure on the Influence Coefficients of Spherical Shells
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Uniform asymptotic solutions are found for the differential equations governing the symmetric bending of spherical shells of constant thickness subjected to self-equilibrating edge loads and internal ...
Multiple Jet Correlations for Gas Turbine Engine Combustor Design
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A correlation method has been developed for predicting the temperature field produced by a single row of closely-spaced jets penetrating into a hot confined crossflow. The correlation procedure ...
Logarithmic Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This note considers the in-plane loading of wedge-shaped plates comprised of a single, homogeneous and isotropic, linear elastic material. Several instances of logarithmic stress singularities ...
Annular Two-Phase Flow—Part 2: Additional Effects
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The theory of Part 1 is modified by taking additional phenomena into account. The liquid film, the gas core, and the interface are considered separately. The effects of entrainment, compressibility, ...
Annular Two-Phase Flow—Part 1: A Simple Theory
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A simple theory for annular two-phase flow is developed in terms of equations for the interfacial and wall shear stresses. Expressions for the pressure drop and void fraction are derived. ...
A Case History of Cracking Failures in Deformed Austenitic Alloy Pipe Operating in the Temperature Range of 1000-1300 Deg F (538-705 Deg C)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The results of several cracking failures in fabricated austenitic alloy pipe are reported in detail. These failures were a result of cracking which occurred at the operating temperature in zones ...
Reduction of Harmonic Response of Cylindrical Shells
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The normal mode method is used to investigate the reduction in the steady-state response of a simply supported cylindrical shell when conventional absorbers are attached to the shell. Two types ...
Review—Theoretical Models of Gas-Liquid Flows
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Two-phase flow is an “insecure” science. Many factors influence the phenomena, limiting the value of theory unless supported and guided by observation. Several methods of analysis are available; ...
CSV
RIS