Search
CSV
RISThe Effect of Certain Machine Parameters and Fiber Preparation on the Properties of Open-End Cotton Yarns
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cotton yarns of 32.81 tex with a twist multiplier of 4.0 were spun using six different drafts ranging from 86.54 to 140.63 on a Suesson Open-End Spintester from slivers that had been carded ...
The Effects of Opening Roller Wire Design and Operating Speed on the Properties of Open-End Cotton Yarn
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An important parameter to consider when spinning yarns using the open-end system is what combinations of comber roll wire design and speed will yield the most desirable yarns. The major goal ...
The Effects of Fiber Properties and Preparation on Trash Removal and Properties of Open-End Cotton Yarns
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cotton yarns of 36.9 Tex were spun at optimum twist levels on a Suessen Open-End Spin-tester at opening roller speeds of 5500 rpm, 7000 rpm, and 8500 rpm, and with waste-gap openings of 2.0 ...
Fiber Migration and Characteristics in Open-End Spun Cotton-Rich Blended Yarn
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study is mainly directed towards blends of cotton and polyester which are cotton-rich blends. Measurements taken from dyed tracer fibers within the yarn and from physical testing indicate ...