Search
CSV
RISLocal Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in Low-Speed Annular Cascade—Part I: Near-Tip Surface
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present study focuses on local heat/mass transfer characteristics on the near-tip region of a rotating blade. To investigate the local heat/mass transfer on the near-tip surface of the ...
Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low-Speed Annular Cascade—Part II: Tip and Shroud
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The local heat/mass transfer characteristics on the tip and shroud were investigated using a low speed rotating turbine annular cascade. Time-averaged mass transfer coefficients on the tip and ...
Effect of Strain Hardening on the Flexural Resistance of Composite Plate Girders Using HSB600 High-Performance Steel in Positive Bending
Publisher: American Society of Civil Engineers
Abstract: This study presents a new nominal flexural resistance of composite I-girder sections using high-performance steel, HSB600, in the positive bending region. Unlike conventional steels, HSB600 undergoes strain hardening ...
Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local ...
Improved Continuum Model for Free Vibration Analysis of Suspension Bridges
Publisher: American Society of Civil Engineers
Abstract: An improved continuum model of three-span suspension bridges has been developed to study the effects of hanger extensibility on free vertical vibrations. This model can be applied to both hinged and continuous girders. To ...
Three-Dimensional Parabolic Cable Element for Static Analysis of Cable Structures
Publisher: American Society of Civil Engineers
Abstract: This paper presents a three-dimensional inclined parabolic cable element for static analysis of cable structures. After a catenary cable element is briefly reviewed, the three dimensional parabolic cable considered in this ...
Three-Dimensional Parabolic Cable Element for Static Analysis of Cable Structures
Publisher: American Society of Civil Engineers
Abstract: This paper presents a three-dimensional inclined parabolic cable element for static analysis of cable structures. After a catenary cable element is briefly reviewed, the three dimensional parabolic cable considered in this ...
Continuum Model for Static and Dynamic Analysis of Suspension Bridges with a Floating Girder
Publisher: American Society of Civil Engineers
Abstract: In this paper, a continuum model for a three-span suspension bridge with a floating girder is newly proposed to investigate its static and dynamic behaviors. This model can consider the extensibility of hangers and thus ...
Effects of Hole Arrangements on Local Heat/Mass Transfer for Impingement/Effusion Cooling With Small Hole Spacing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present study investigates the local heat (mass) transfer characteristics of flow through perforated plates. Two parallel perforated plates were placed, relative to each other, in either ...
Local Heat/Mass Transfer With Various Rib Arrangements in Impingement/Effusion Cooling System With Crossflow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present study has been conducted to investigate the effect of rib arrangements on flow and heat/mass transfer characteristics for an impingement/effusion cooling system with initial crossflow. ...